Air Conditioning Installation - Easy Steps to Help Your Air Conditioning System Work

Air Conditioning Installation,  Placing the outdoor unit: Before you can place the outdoor unit into the outdoor location, the outdoor unit must be assembled. This includes securing the outdoor components to the ground with steel pads. Installing the outdoor units must be done to a depth of at least three inches to provide a strong support system for the air conditioning installation and that is why you should look for air conditioning repair services. Also, make sure your soil is thick enough to resist draining the water into the system. Once the outdoor components are in place, secure all mounting hardware to the foundation.

Air Conditioning Installation,  Placing the furnace: After securing the outdoor components, it is time to place the furnace into its location. First, set up the thermostat to the setting you want. If your new unit will have a manual setting, then place it where the manual control is located. It is important to remember that placing an air conditioning installation in the wrong location could be dangerous to the unit and/or homeowner. If your furnace model uses an automatic control, then place the furnace in its location where the electrician's box is located.

Air Conditioning Installation OR Placing the ductwork: Now, if your new air conditioner is going to be located in an existing central air conditioning installation, then you only have one more step to complete. In order to properly install your new air conditioner, you need to hire Quality Air Experts. However, you must make sure your ducts are sealed well to prevent moisture from reaching your new air conditioner. The last step in the air conditioning installation process is placing the blower motor in position. Be sure to follow manufacturer's instructions when installing the blower motor so it does not become damaged by placing it in the wrong location.

Air Conditioning Installation, CO Placing the air conditioner: Once you have your ductwork placed in the walls in your house, you are now ready to turn on your new air conditioning system installation. Turn on the thermostat to the setting you want, and open the door to your newly installed air conditioner. Once your air conditioner starts cooling down, you may notice that a small line of smoke is starting to form at the front of your air conditioner. If this has happened, do not worry about replacing your air conditioner, the problem only needs to be fixed.

Air Conditioning Installation, Placing your cooling units: Now that your air conditioners are in good working order, you are ready for the final step in the installation process. You need to place your refrigerant in the storage tank. Once the refrigerant is added, turn your air conditioners on, and wait for coolant to fill up in the storage tank. Refrigerant will turn into a vapor and will start cooling down your outdoor cooling units.

Air Conditioning Installation, Electrical connections: You are almost done with the installation process. Your ductwork is in good shape, and you have properly located your electrical connections to the wall plates inside your garage. Before closing your garage door, you will need to test your electrical connections, make sure everything is in good working order. This https://en.wikipedia.org/wiki/Heating,_ventilation,_and_air_conditioning will enable you to know more about ACs.